[Handset] Predialing - AT&T SB67040 User Manual

[Handset] Predialing

You can dial a phone number before pressing PHONE or SPEAKER. Pressing a dial-pad key in these cases initiates the Predial
mode. In this mode, the Handset produces no dial tone. You can also predial from a list.
To Predial a call:
12:30p Feb 23
9-1-706-555-016
Press to backspace
PAUSE CANCEL
Figure 268. Predial Mode
Outgoing Calls
Synapse User's Guide
1. Press any dial-pad key to initiate Predialing, as shown in Figure 268. (For outside calls, dial
9 or whatever digit, if any, that must be dialed first before outside calls).
OR
Access a phone number from any of the lists described in
Managing Items in Lists with the Cordless Handset" on page
For outside phone numbers in Voicemail and CID lists, Synapse dials whatever digit, if
any, must be dialed before outside calls and then dials the number in the display.
Therefore, numbers that need editing (adding a preceding 1 or a country code, or
removing the area code) cannot be dialed from Voicemail.
2. Press additional dial-pad keys. You have the following options:
Press the Navigation key to delete a digit and move the cursor back one space.
to insert a two-second pause. The pause appears as a P in the phone
Press
number.
Press OFF or
3. Press PHONE or SPEAKER to dial the Predial digits.
To do this with the Deskset, see
to clear all digits. The Idle screen displays.
"Predialing" on page 197.
202
"[Handset] Accessing and
123.