[Handset] Answer A Call - AT&T SB67040 User Manual

[Handset] Answer a Call

Examples of incoming call screens are shown below. Figure 286 shows a call received when the extension is idle. Figure 287
shows a call received during an active call. Calls received during active calls ring only once.
Options for a call received while the extension is idle:
12:30p Feb. 23
INCOMING
EXT 249
Graham Bell
John Smith
232-555-0176
2 Missed Calls
5 New MSGs
IGNORE FWD-VM
Figure 286. Incoming Call
Options for a call received during an active call:
NEXT CALL
Graham Bell
9-1-250-555-0123
02:01 ON A CALL
XFER CONF
Figure 287. Incoming Call
During an Active Call
Incoming Calls
Synapse User's Guide
Press SELECT, PHONE, or SPEAKER to answer the call.
Press to silence the ringer. You can still answer the call.
Press to forward the call to Voicemail.
Press Volume while the Handset is ringing to decrease or increase the
ringer volume.
Call screening is not available from the Cordless Handset.
Press PHONE or SELECT to answer the incoming call. The current call is automatically
placed on hold.
Press to silence the ringer. The call is placed in the Call Deck. See
Call Deck" on page 231. You can still answer the call.
Press to forward the call to Voicemail.
Press SPEAKER to switch the current call to and from the speakerphone.
216
"[Handset]