AT&T SB67040 User Manual page 334

Table 20. Technical Specifications (Continued)
Feature
Power Requirements
RJ–45 Ethernet
Network Jack
PSTN Gateway
Telephone Jacks
T1 Jack
Gateway BYPASS
LAN Cable
[T1] T1 Port
[ATA] FXS
[ATA] AUX In
Appendixes
Synapse User's Guide
Specification
PSTN Gateway: 5.1V DC @ 1700mA
T1 Gateway and ATA: 12V @ 18 Watts
Deskset: 5.1V DC @ 1700mA
Cordless Handset, Cordless Headset chargers: 6V DC @ 200mA
Cordless Handset: 2.4V 550mA Ni–MH battery
Cordless Headset: 3.7V 240mAH battery
(10Base–T/100Base–Tx) with auto MDI/MDIX switching
1–4 and BYPASS (FXO ports) use traditional 2–conductor wiring
RJ48C jack
26mA loop current; REN 5; 100m max loop length
Cat.-5 standard cable, except the T1 Gateway, which uses a standard Cat.-6 LAN cable
RJ48C standard T1 interface
The T1 Gateway provides ITU G.168 compliant hardware-based echo cancellation.
26mA loop current; REN 5; 100m max loop length
3.5 mm Tip (Signal), Ring (NC) Sleeve (Ground) (TRS) jack
Frequency range 300 to 3.4K Hz
Input level -15dBm nominal
Impedance greater than or equal to 10K ohms input
AC coupling
334