[Handset] Dial-Pad Entry - AT&T SB67040 User Manual

[Handset] Dial-Pad Entry

Use the dialing keys to enter alphabetical characters to search the Directory and Extension lists. See
Managing Items in Lists with the Cordless Handset" on page
7 and 9 have four assigned letters, as shown in Figure 27. The keys function as follows:
1. Pressing the dialing key once displays names starting with the first letter on the key.
2. Pressing the dialing key twice displays names starting with the second letter on the key.
3. Pressing the dialing key three displays names starting with enters the third letter on the key.
4. Pressing the dialing key four times displays names starting with the number, or the fourth letter for keys 7 and 9 that require
an additional press to cycle into lower case letters.
5. Pressing the key further cycles through the letters again.
The # and * keys have been assigned special characters, as shown in Figure 27. Repeatedly pressing these keys cycles through
each special character in the order shown.
The Handset dial-pad keys are a little different from the Deskset dial-pad keys. All characters are uppercase, and the
special characters are different.
Overview
Synapse User's Guide
[Handset] Cordless Handset Special Characters
Key Press 1st 2nd
# # &
*
! (
Figure 27. Handset Special Character Assignment
123. Digits 2, 3, 4, 5, 6, and 8 have three assigned letters, while digits
3rd 4th 5th
' - .
*
) +
49
"[Handset] Accessing and
6th
@
?