[Handset] Multiple Incoming Calls - AT&T SB67040 User Manual

[Handset] Multiple Incoming Calls

If the Handset receives more than one call at a time, the calls display in a list on the screen. The most recent call is added to the
bottom of the list and displays as a two-line name and telephone number. The other pending calls display in the list as one-line
entries, as shown in Figure 288. This screen remains active until you answer one of the calls or until all calls end or are forwarded.
If you answer one of the calls, then the remaining calls are placed in the Call Deck. See
Options during multiple incoming calls:
12:30p Feb 23
INCOMING
Mary William s
9-503-555-0194
Charlie Johnson
Graham Bell
232-555-0176
00:12 ON A CALL
IGNORE FWD-VM
Figure 288. Multiple
Incoming Calls
Incoming Calls
Synapse User's Guide
Press the or Navigation key to cycle through the incoming calls.
Press SELECT, PHONE, or SPEAKER to answer the highlighted call.
Press to silence the ringer of the highlighted call.
Press to forward the highlighted incoming call to Voicemail.
Press Volume to decrease or increase the ringer volume.
Unanswered incoming calls are handled according to the Call Forward–No Answer
setting.
The system administrator sets the call-forwarding options. For more
information on this setting, see the Synapse Administrator's Guide at
www.telephones.att.com/synapseguides
217
"[Handset] Call Deck" on page
.
231.