[Handset] Transferring To An Outside Number - AT&T SB67040 User Manual

[Handset] Transferring to an Outside Number

To transfer an active or held call to an outside number with the Cordless Handset:
Graham Bell
Transfer To:
EXT_#s CANCEL
Figure 316. Outside
Transfer
Graham Bell
Transfer To:
John Stanley
1-232-423-2234
Press XFER to
complete
XFER CANCEL
Figure 317. Pending
Transfer
Call Management
Synapse User's Guide
1. From either an active or held call, press
Handset displays the screen shown in Figure 316.
2. To transfer a call to an outside number, dial the number directly or access the outside
number through the Call Log, Redial list, Directory, or Quick Dial.
For outside phone numbers in Voicemail and CID lists, Synapse dials whatever digit, if
any, must be dialed before outside calls and then dials the number in the display.
Therefore, numbers that need editing (adding a preceding 1 or a country code, or
removing the area code) cannot be dialed from Voicemail. Press the
key to alter Call Log entries.
3. To dial the selected number as a transfer destination, press SPEAKER or PHONE.
A screen similar to the one shown in Figure 317 displays.
4. Press to complete the transfer.
You can press
the extension picks up (supervised transfer).
. An active call is placed on hold, and the
before the extension picks up (unsupervised transfer) or after
233
or Navigation