Standby Transmission - Kyocera Triumph-Adler P-3527w Operation Manual

Sending Faxes > Standby Transmission

Standby Transmission

During a communication, you can scan originals and schedule a next transmission. When the first communication is
completed, the machine automatically starts the scheduled next transmission. When using standby transmission, you do
not need to wait when a communication has prolonged due to broadcast transmission.
NOTE
Together with delayed transmission and interrupt send, up to 35 transmissions can be scheduled.
You can use the broadcast transmission function.
1
2
3
4
5
Select [FAX] on the Home screen.
Place the originals.
Select the destination, and set transmitting functions if you want to use
any.
Press the [Start] key.
Scanning of the originals starts, and the next transmission is scheduled.
NOTE
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 7-10)
When the communication is completed, the scheduled transmission will
begin.
3-21