Table of Contents
Advertisement
CHAPTER 14
Configuration Examples
Example: Configuring a JCS1200 Platform and a Single T Series Router
Requirements
Copyright © 2010, Juniper Networks, Inc.
Example: Configuring a JCS1200 Platform and a Single T Series Router on page 123
Example: Configuring a JCS1200 Platform and Multiple T Series Routers on page 128
Example: Configuring Shared Interfaces (SONET) on page 136
Example: Configuring Shared Interfaces (Ethernet) on page 147
Example: Configuring Route Reflection—Roadmap on page 157
Example: Configuring the JCS1200 Platform as a Route Reflector on page 157
Example: Configuring Client-to-Client Reflection (OSPF) on page 166
Example: Consolidating a Layer 2 VPN Network on page 177
In this configuration example, the JCS1200 platform is connected to a single T640 router.
The configuration is described in the following sections:
Requirements on page 123
Overview on page 124
Configuration on page 124
Verification on page 126
This configuration example requires the following hardware and software components:
Junos OS Release 9.1 or later
JCS1200 platform with Routing Engines in slots 1, 2, 3, and 4
T640 router with FPCs in slots 0, 1, 2, and 3
123
Advertisement
Table of Contents
