Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 164

JUNOS 10.4 Protected System Domain Configuration Guide
Results
Step-by-Step
Procedure
140
Display the results of the configuration:
system-domains {
root-domain-id 3;
protected-system-domains {
psd5 {
description customerA;
fpcs [ 1 2 3 ];
control-system-id 1;
control-slot-numbers [ 5 6 ];
control-plane-bandwidth-percent 50;
}
psd6 {
description customerB;
fpcs [ 4 5 7 ];
control-system-id 1;
control-slot-numbers 7;
control-plane-bandwidth-percent 50;
}
}
}
}
interfaces
so-6/0/0 {
no-keepalives;
encapsulation frame-relay;
unit 0 {
interface-shared-with psd5;
dlci 16;
}
unit 1 {
interface-shared-with psd5;
dlci 17;
}
unit 2 {
interface-shared-with psd5;
dlci 18;
}
unit 3 {
interface-shared-with psd6;
dlci 100;
}
}
PSD5 Configuration
To configure PSD5:
At the
1. [edit interfaces]
the physical tunnel interface.
At the [edit interfaces ut-1/0/0]
2.
statements to configure the logical tunnel interfaces.
hierarchy level, include the
hierarchy level, include the
statement to configure
ut-1/0/0
unit 0 , unit 1 , and
Copyright © 2010, Juniper Networks, Inc.
unit 2