Table 19: T640 Router Configuration - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

JUNOS 10.4 Protected System Domain Configuration Guide
Results
Step-by-Step
Procedure
132
Display the results of the configuration:
system-domains {
root-domain-id 1;
protected-system-domains {
psd1 {
description "psd for customer1";
fpcs [ 0 1 2 3];
control-system-id 1;
control-slot-numbers [ 1 2 ];
}
psd2 {
description "psd for customer2";
fpcs [ 4 5 6 7];
control-system-id 1;
control-slot-numbers [ 3 4 ];
}
}
}
T640 Router Configuration
To configure the RSD and create the PSDs on the T640 router:
Log in to the T640 router.
1.
Configure RSD2 and the parameters specified in Table 19 on page 132.
2.

Table 19: T640 Router Configuration

PSD FPCs
3 0, 1, 2, and 3
4 4, 5, 6, and 7
At the
[edit chassis system-domains]
3.
the root-domain-id 2
At the
4. [edit chassis system-domains]
protected-system-domains psd1
At the [edit chassis system-domains protected-system-domains psd3]
5.
level:
a. Include the
fpcs 0 fpcs 1 fpcs 2 fpcs 3
2, and 3 to PSD3.
b. Include the
control-system-id 1
c. Include the
control-slot-numbers 5 control-slot-numbers 6
the Routing Engines in slots 5 and 6 in the JCS chassis to PSD3.
Redundant Routing Engine Slots
5 and 6
7 and 8
hierarchy level of the Junos OS CLI, include
statement to identify the RSD.
hierarchy level, include the
statement to create PSD3.
statement to assign the FPCs in slots 0, 1,
statement to identify the JCS1200 platform.
hierarchy
statement to assign
Copyright © 2010, Juniper Networks, Inc.