Table of Contents
Advertisement
info
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
info -T target
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Display information about JCS hardware components
and component configuration.
-T target
—Specify a command target to display information about a specific hardware
component. You can only display information for one target at a time. Valid targets for
this command include:
—Specify a Routing Engine as the command target. Replace
system:blade[x]
the Routing Engine slot number (
—Specify a JCS fan module as the command target. Replace
system:blower[x]
the fan module number (
—Specify a JCS management module as the command target. Replace
system:mm[x]
with the primary management module number (
x
system:mt[x]
—Specify a JCS media tray as the command target. Replace
media tray number (
or
1
system:mux[x]
—Specify a JCS MUX card as the command target. Replace
MUX card number (
or
1
2
—Specify a JCS power module as the command target. Replace
system:power[x]
with the power module number (
—Specify a JCS switch module as the command target. Replace
system:switch[x]
with the switch module number (
—Specify the JCS alarm panel as the command target.
system:tap
operator
Displaying Vital Product Data on page 200
info (System) on page 220
info (Management Module) on page 221
info (Routing Engine) on page 221
Table 26 on page 220 lists the output fields for the
in the approximate order in which they appear.
Chapter 16: Summary of JCS Management Module Monitoring Commands
1
through
12
).
through
).
1
4
).
2
).
1
through
4
).
1
or
2
).
info
or
).
1
2
x
with the
x
with the
command. Output fields are listed
with
x
with
x
x
x
219
Advertisement
Table of Contents
