Before You Begin; Verifying The Fpc Bootrom Version - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

CHAPTER 4

Before You Begin

Verifying the FPC BootROM Version

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Verifying the FPC BootROM Version on page 31
Keeping the JCS Management Module Default SNMP Setting on page 32
Before connecting the JCS1200 platform to any T Series router, ensure that the bootROM
version for all FPCs on the T Series chassis is ROM Monitor Version 6.4 or later. If an FPC
bootROM version is earlier than Version 6.4, the FPC will not come online. To upgrade
the firmware, you must contact your Juniper Networks customer support representative.
To determine if you need to upgrade the FPC firmware, display the version of the firmware
on all FPCs by issuing the
user@host> show chassis firmware
Part
FPC 0
FPC 1
FPC 2
FPC 4
FPC 5
FPC 6
FPC 7
SPMB 0
SPMB 1
Keeping the JCS Management Module Default SNMP Setting on page 32
Configuration Roadmap on page 33
show chassis firmware command:
Type Version
ROM Juniper ROM Monitor Version 7.5b4
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 6.4b18
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 7.5b4
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 6.4b18
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 6.4b20
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 7.5b4
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 6.4b20
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 6.4b18
O/S Version 9.1-20080222.0 by builder on 2008-0
ROM Juniper ROM Monitor Version 6.4b18
O/S Version 9.1-20080222.0 by builder on 2008-0
31