Figure 3: Typical Network Of Route Reflectors; Figure 4: Route Reflectors On The Jcs1200 Platform - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

PE
PE
Copyright © 2010, Juniper Networks, Inc.

Figure 3: Typical Network of Route Reflectors

PE RR 1
PE RR 2
Figure 4 on page 9 shows the JCS1200 platform providing four distinct route reflectors
and preserving the current network architecture.

Figure 4: Route Reflectors on the JCS1200 Platform

PE
RR1
PE
Figure 5 on page 10 shows an example of route reflector partitioning on the JCS1200
platform. Each JCS1200 chassis can hold up to 12 Routing Engines. You can get route
scalability up to 12x as you incrementally add Routing Engines to the JCS1200 chassis
and configure them for route reflection. You do not need to buy a new router to increase
route reflector capacity.
Chapter 1: JCS1200 Chassis and T Series Routers as a Single Platform
RR 3
RR 4
RR3
RR4
RR2
PE
PE
PE
PE
9