Alertentries; Table 6: Alertentries Output Fields - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

Protected system domain configuration
Table of Contents

Advertisement

JUNOS 10.4 Protected System Domain Configuration Guide

alertentries

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
54
alertentries -T system:mm[x] -recipient-number <-f filter-type> <-n recipient-name>
<-status (on | off)> <-t snmp>
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Display or configure the recipients of SNMP alerts
generated by the JCS management module.
—Specify a JCS management module as the command target. Replace
-T system:mm[x]
with the primary management module number (
x
—Create or specify an alert recipient. Each alert recipient you create
-recipient-number
must have a unique number (
-f filter-type
—(Optional) Filter the type of alerts received by the alert recipient. Replace
with a value of
filter-type
critical
all alerts).
-n recipient-name
—(Optional) Specify the name of the alert recipient. Recipient names
can be up to 31 characters in length. The name can include any character (including
spaces), except for less than (
-status (on | off)
—(Optional) Set alert status for the specified alert recipient. When the
status is
, the recipient receives alarm notifications. When the status is
on
does not receive alarm notifications.
-t snmp
—(Optional) Sets SNMP as the alert notification method for the specified alert
recipient.
operator (display)
supervisor (display or configure)
Configuring SNMP Traps on page 43
monalerts on page 69
snmp on page 74
alertentries (Display) on page 55
alertentries (Configure) on page 55
Table 6 on page 54 lists the output fields for the
listed in the approximate order in which they appear.

Table 6: alertentries Output Fields

Field Name
-status
or
1
through
).
1
12
(receive critical alerts only) or
) and greater than (
) symbols.
<
>
alertentries
Field Description
Alert status for the specified recipient. Alert status is
).
2
(no filtering, receive
none
, the recipient
off
command. Output fields are
or
on
off
Copyright © 2010, Juniper Networks, Inc.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents