Shutdown - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

JUNOS 10.4 Protected System Domain Configuration Guide

shutdown

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
shutdown shutdown
228
shutdown -f -T system:blade[x]
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Shut down the operating system on the Routing Engine
(blade).
-T system:blade[x] —Specify a Routing Engine as the target of the command (the Routing
Engine to be shut down). Replace
-f —Force the operating system on the Routing Engine to shut down.
supervisor
power on page 224
shutdown on page 228
When you enter this command, you are provided feedback on the status of your request.
system> shutdown -f -T system:blade[6]
OK
with a value of through
x 1
Copyright © 2010, Juniper Networks, Inc.
.
12