Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 174

JUNOS 10.4 Protected System Domain Configuration Guide
Results
150
c. Include the
control-slot-numbers 3 control-slot-numbers 4
the Routing Engines in slots 3 and 4 in the JCS chassis to PSD2.
d. Include the control-plane-bandwidth-percent 50
of the bandwidth on the JCS switch modules and T-CBs to PSD2.
At the
[edit interfaces]
7.
the physical Gigabit Ethernet interface.
At the [edit interfaces ge-6/0/0]
8.
Include the
vlan-tagging
routed or bridged Ethernet frames with 802.1Q VLAN tags.
Include the ,
unit 0
interfaces.
At the
[edit interfaces ge-6/0/0 unit n]
9.
statements:
interface-shared-with psdn
For unit 0, the value is
For unit 1, the value is
For unit 2, the value is
For unit 3, the value is
vlan vlan-id —Configure the virtual LAN (VLAN) identifier to bind the 802.1Q VLAN
tag ID to the logical interface:
For unit 0, the value is
For unit 1, the value is
For unit 2, the value is
For unit 3, the value is
Display the results of the configuration:
system-domains {
root-domain-id 3;
protected-system-domains {
psd5 {
description customerA;
fpcs [ 1 2 3 ];
control-system-id 1;
control-slot-numbers [ 5 6 ];
control-plane-bandwidth-percent 50;
}
psd6 {
description customerB;
fpcs [ 4 5 7 ];
hierarchy level, include the
hierarchy level:
statement to enable the receiving and forwarding of
, , and statements to configure the logical
unit 1 unit 2 unit 3
hierarchy level, include the following
—Assign the logical interface to a PSD:
(PSD5).
5
(PSD5).
5
(PSD5).
5
(PSD6).
6
.
16
17 .
.
18
100 .
statement to assign
statement to allocate 50 percent
statement to configure
ge-6/0/0
Copyright © 2010, Juniper Networks, Inc.