Table of Contents
Advertisement
Access Privileges
System Information
Management Tasks
Related
Documentation
PSD Administration View
Copyright © 2010, Juniper Networks, Inc.
The RSD administrator creates the PSDs through the Junos OS running on the Routing
Engines in the T Series chassis. With the correct user privileges and authentication, an
RSD administrator can log in to a PSD from the RSD.
The RSD administrator can use the
configured within the RSD. Otherwise, when issuing
administrator views all hardware on the T Series router.
By default, system log files are stored in the
a system log message on an RSD originates from an FPC that is assigned to a PSD, the
system message is logged locally at the RSD and is also forwarded to that particular
PSD. If a system log message originates from a hardware resource that is shared between
and RSD and PSDs, the message is logged locally at the RSD and is also forwarded to
all PSDs associated with the RSD.
The RSD administrator manages all hardware on the T Series router, including the Routing
Engines, FPCs, Switch Interface Boards (SIBs), the Switch Processor Mezzanine Board
(SPMB), Power Entry Modules (PEMs), and fans. The RSD administrator can issue
request
,
clear
, and
test
commands for any hardware on the T Series router and for any
FPCs that are part of a PSD.
NOTE: A switchover between Routing Engines on the T Series router (the
RSD) does not affect PSDs. However, when an RSD reboots or goes offline,
the FPCs assigned to PSDs will reboot or go offline.
JCS Administration View on page 17
PSD Administration View on page 19
Logging In to a PSD from the RSD on page 237
Junos OS Verification Tasks on page 238
The Protected System Domain (PSD) view is controlled by the administrators and users
of the Junos OS running on the Routing Engines in the JCS chassis that belong to a
particular PSD. Topics in this section include:
Access Privileges on page 20
System Information on page 20
Management Tasks on page 20
Chapter 2: JCS1200 and T Series Platform Software Views
command to view which PSDs are
show chassis psd
show
commands on the RSD, the
/var/log/message
directory on the router. If
,
show
19
Advertisement
Table of Contents
