Exit - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

exit

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
exit exit
Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Summary of JCS Management Module Configuration Commands
exit -T system:mm[x]
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Terminate the current CLI session.
-T system:mm[x] —Specify a JCS management module as the target of the command.
Replace with a value of
x 1
operator
JCS1200 Software Components on page 23
exit on page 63
When you enter this command, no feedback is provided. Instead, the user login prompt
appears.
system> exit –T system:mm[1]
username:
or .
2
63