Table of Contents
Advertisement
Results
Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
system> baydata —b 07 —data "V01–JCS01–SD03–PSD02–REP07–REB00–PRDT640"
Display the results of the configuration:
system> baydata
Bay
Status
Definition
1
No blade present
2
No blade present
3
No blade present
4
No blade present
5
Supported
V01 JCS01 SD03 PSD01 REP05 REB06 PRDT640
6
Supported
V01 JCS01 SD03 PSD01 REP05 REB06 PRDT640
7
Supported
V01 JCS01 SD03 PSD02 REP07 REB00 PRDT640
8
No blade present
9
No blade present
10
No blade present
11
No blade present
12
No blade present
RSD Configuration
To configure the RSD:
Log in to the T640 router.
1.
At the
[edit chassis system-domains]
2.
the
root-domain-id 3
At the
[edit chassis system-domains]
3.
protected-system-domains psd1
At the
4.
[edit chassis system-domains protected-system-domains psd1]
level:
a. Include the
fpcs 1 fpcs 2 fpcs 3
to PSD1.
b. Include the
control-system-id 1
c. Include the
control-slot-numbers 5 control-slot-numbers 6
the Routing Engines in slots 5 and 6 in the JCS chassis to PSD1.
d. Include the
control-plane-bandwidth-percent 50
of the bandwidth on the JCS switch modules and T Series Control Boards (T-CBs)
to PSD1.
At the
5.
[edit chassis system-domains]
protected-system-domains psd2
At the
6.
[edit chassis system-domains protected-system-domains psd2]
level:
a. Include the
fpcs 4 fpcs 5 fpcs 6 fpcs 7
6, and 7 to PSD2.
b. Include the
control-system-id 1
hierarchy level of the Junos OS CLI, include
statement to identify the RSD.
hierarchy level, include the
statement to create PSD1.
statement to assign the FPCs in slots 1, 2, and 3
statement to identify the JCS1200 platform.
hierarchy level, include the
statement to create PSD2.
statement to assign the FPCs in slots 4, 5,
statement to identify the JCS1200 platform.
Chapter 14: Configuration Examples
hierarchy
statement to assign
statement to allocate 50 percent
hierarchy
149
Advertisement
Table of Contents
