Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 189

Results
Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
Display the results of the configuration:
interfaces {
ge-2/0/1 {
unit 0 {
family inet {
address 10.12.100.13/30;
}
}
}
ge-2/0/2 {
unit 0 {
family inet {
address 10.12.100.5/30;
}
}
}
ge-2/0/3 {
unit 0 {
family inet {
address 10.12.100.1/30;
}
}
}
}
PSD13 Configuration (Router 3)
To configure Router 3 (PSD13):
At the
1. [edit interfaces]
the Gigabit Ethernet interface.
At the [edit interfaces ge-0/1/7]
2.
configure the logical interface.
At the
3. [edit interfaces ge-0/1/7 unit 0]
statement to configure the IPv4 suite protocol family.
10.12.100.2/30
At the
4. [edit interfaces]
the internal Ethernet interface.
At the
[edit interfaces ge-0/2/3]
5.
configure the logical interface.
At the
6. [edit interfaces ge-0/2/3 unit 0]
statement to configure the IPv4 suite protocol family.
10.12.100.9/30
At the
7. [edit interfaces]
the internal Ethernet interface.
At the
[edit interfaces ge-0/1/0]
8.
configure the logical interface.
At the
9. [edit interfaces ge-0/1/0 unit 0]
statement to configure the IPv4 suite protocol family.
10.12.100.17/30
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
Chapter 14: Configuration Examples
statement to configure
ge-0/1/7
unit 0 statement to
family inet address
statement to configure
ge-0/2/3
statement to
unit 0
family inet address
statement to configure
ge-0/1/0
statement to
unit 0
family inet address
165