Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
12
Figure 7: JCS Switch Module Ports
When you first access a PSD through the console port on the Routing Engine, you configure
the IP address for one or both of these management ports.
Figure 8 on page 12 provides a more detailed look at the connections between the two
platforms. RE m indicates a master Routing Engine on the JCS1200 platform, whereas
RE b represents a backup Routing Engine.
Figure 8: Connections Between JCS1200 and T Series Platforms
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
