Table of Contents
Advertisement
Supported Routing Platforms
Using the Indexes
Using the Examples in This Manual
Merging a Full Example
Copyright © 2010, Juniper Networks, Inc.
Routing Information Protocol (RIP)
Simple Network Management Protocol (SNMP)
Personnel operating the equipment must be trained and competent; must not conduct
themselves in a careless, willfully negligent, or hostile manner; and must abide by the
instructions provided by the documentation.
For the features described in this manual, the Junos OS currently supports the following
routing platforms:
T320 Core Routers, T640 Core Routers, and T1600 Core Routers
Juniper Networks JCS1200 Control System
This guide contains two indexes: a complete index of all index entries, and an index of
statements and commands only.
The complete index points to pages in the statement summary chapters. The index entry
for each configuration statement contains at least two entries:
The first entry points to the statement summary section.
The second entry, usage guidelines, points to the section in a configuration guidelines
chapter that describes how to use the statement.
If you want to use the examples in this manual, you can use the
merge relative
command. These commands cause the software to merge the incoming
configuration into the current candidate configuration. If the example configuration
contains the top level of the hierarchy (or multiple hierarchies), the example is a full
example. In this case, use the
If the example configuration does not start at the top level of the hierarchy, the example
is a snippet. In this case, use the
described in the following sections.
To merge a full example, follow these steps:
From the HTML or PDF version of the manual, copy a configuration example into a
1.
text file, save the file with a name, and copy the file to a directory on your routing
platform.
For example, copy the following configuration to a file and name the file
Copy the
ex-script.conf
command.
load merge
command. These procedures are
load merge relative
file to the
directory on your routing platform.
/var/tmp
About This Guide
or the
load merge
load
.
ex-script.conf
xxi
Advertisement
Table of Contents
