Table 8: Config Output Fields - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

Output Fields
config (Display) config (Display)
config (Configure a JCS
Management Module)
config (Configure a
Routing Engine)
Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Summary of JCS Management Module Configuration Commands
Table 8 on page 61 lists the output fields for the
in the approximate order in which they appear.

Table 8: config Output Fields

Field Name
Name
Contact
Loc
system> config –T system:mm[1]
—name QA-Prototype
-contact John Markham
-loc QA Lab
system> config –T system:mm[1] -contact "George Chu x2556" -name SW-MM1 -loc "SW Lab"
OK
system> config –T system:blade[2] -name QA-Blade2
OK
command. Output fields are listed
config
Field Description
Device name
Contact name for the primary JCS management module
Location of the primary JCS management module
61