Displaying Voltage Information - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

Related
Documentation

Displaying Voltage Information

Purpose
Action
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
---------- ------- -------
MM Ambient 43.00 60.00
The following sample output appears when temperature information is displayed for a
JCS Routing Engine:
system> temps –T blade[3]
Warning
Component Value Warning
---------- ------- -------
CPU 1 38.00 85.00
temps on page 229
You can display voltage information for components in the JCS chassis. This information
is useful for viewing current voltage values and voltage threshold settings.
Display voltage information for components in the JCS chassis using the JCS CLI
command.
The following sample output appears when voltage information is displayed for a JCS
management module:
system> volts –T mm[1]
Source Value Warning
------ ------ ---------------
+5v +4.84 (+4.50,+5.25)
+3.3v +3.26 (+3.00,+3.47)
+12v +12.03 (+10.80,+12.60)
-5v -4.90 (-5.50,-4.75)
+2.5v +2.48 (+2.25,+2.63)
+1.8v +1.76 (+1.62,+1.89)
The following sample output appears when voltage information is displayed for a JCS
Routing Engine:
system> volts –T blade[1]
Source Value
--------------- -------
Planar 0.9V +0.88
Planar 12V +12.12
Planar 3.3V +3.30
Planar 5V +4.90
Planar VBAT +3.05
volts on page 231
Chapter 15: Managing the JCS1200 Platform
------- ----------
55.00 (5.00)
Reset Hysteresis
------- ----------
95.00 (7.00)
Warning
Reset Hysteresis
-------------- ----------
(+4.85,+5.15) (+0.35,+0.10)
(+3.20,+3.40) (+0.20,+0.07)
(+11.64,+12.36) (+0.84,+0.24)
(-5.15,-4.85) (+0.35,+0.10)
(+2.42,+2.58) (+0.17,+0.05)
(+1.74,+1.86) (+0.12,+0.03)
Critical
----------------
(+0.40,+1.50)
(+10.20,+13.80)
(+2.78,+3.79)
(+4.23,+5.74)
(+2.54,+3.44)
volts
207