Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
sshcfg
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
76
sshcfg -T system:mm[x] <-cstatus (enabled | disabled)> <-hk (rsd | dsa | gen)> <-v1 (on |
off)>
Command supported by Junos OS Release 9.1 and later.
(JCS1200 platform only) Display or configure SSH access on the JCS management
module.
—Specify the JCS management module as the target of the command.
-T system:mm[x]
Replace
with a value of
x
1
-cstatus (enabled | disabled)
management module.
—(Optional) Generate a host key for the JCS management module.
-hk gen
—(Optional) Display RSA or DSA host key information for the JCS
-hk (rsa | dsa)
management module.
-v1 (on | off)
—(Optional) Enable or disable SSH v1 on the JCS management module. (SSH
v2 is always enabled.)
operator (display)
supervisor (display or configure)
Configuring SSH Access on page 45
sshcfg (Display) on page 77
sshcfg (Configure) on page 77
Table 14 on page 76 lists the output fields for the
listed in the approximate order in which they appear.
Table 14: sshcfg Output Fields
Field Name
v1
cstatus
CLI SSH port
sstatus
SMASH SSH port
or
.
2
—(Optional) Enable or disable the SSH server on the JCS
sshcfg
Field Description
SSH v1 status (
On
or
Off
). SSH v2 is always enabled (
Status of the CLI SSH server (enabled or disabled).
Port number assigned to the CLI SSH server.
Status of the SMASH (secure mashup) SSH server (enabled or
disabled).
Port number assigned to the SMASH SSH server.
command. Output fields are
On
).
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
