Figure 15: Example: Route Reflection; Table 21: Chassis Parameters For Route Reflection - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

JUNOS 10.4 Protected System Domain Configuration Guide
Overview and Topology
Configuration
158

Figure 15: Example: Route Reflection

ge-1/1/1
10.12.100.6
ge-2/0/2
10.12.100.5
ge-2/0/3
10.12.100.1
R2
ge-2/0/1
10.12.100.13
fxp1.1
10.12.100.14
Figure 15 on page 158 shows a T640 router (T-route) and four Routing Engines (RR, R1,
R2, and R3) on the JCS1200 chassis (bcg) configured for route reflection.
Each router is configured as a separate PSD. Each PSD has an associated Routing Engine
assigned on the JCS chassis and an associated FPC assigned on the T640 router. Table
21 on page 158 provides the chassis parameters required for the JCS1200 platform and
for the T640 router for each PSD.

Table 21: Chassis Parameters for Route Reflection

Router PSD
Route PSD15
Reflector (RR)
Router 1 (R1) PSD11
Router 2 (R2) PSD12
Router 3 (R3) PSD13
The configuration of route reflection is described in the following sections:
JCS1200 Configuration on page 159
RSD Configuration on page 161
R1
ge-1/1/0
10.12.100.10
ge-0/2/3
10.12.100.9
ge-0/1/7
10.12.100.2
R3
ge-0/1/0
10.12.100.17
fxp0.1
10.12.100.18
RR
JCS 1200 Platform
(bcg)
Routing Engine in slot 1
(bcgcpu1)
Routing Engine in slot 2
(bcgcpu2)
Routing Engine in slot 3
(bcgcpu3)
Routing Engine in slot 3
(bcgcpu4)
Copyright © 2010, Juniper Networks, Inc.
T640 Routing Node
(T-route)
(No FPC required)
FPC in slot 1 (FPC1)
FPC in slot 2 (FPC2)
FPC in slot 0 (FPC0)