Table of Contents
Advertisement
C
ONFIGURING THE
CLI – This example adds a trap manager and enables both authentication
and link-up, link-down traps.
Console(config)#snmp-server host 192.168.1.19 private
version 2c
Console(config)#snmp-server enable traps authentication
User Authentication
You can restrict management access to this switch using the following
options:
•
User Accounts – Manually configure access rights on the switch for
specified users.
•
Authentication Settings – Use remote authentication to configure
access rights.
•
HTTPS Settings – Provide a secure web connection.
•
SSH Settings – Provide a secure shell (for secure Telnet access).
•
Port Security – Configure secure addresses for individual ports.
•
802.1X – Use IEEE 802.1X port authentication to control access to
specific ports.
•
IP Filter – Filters management access to the web, SNMP or Telnet
interface.
Configuring User Accounts
The guest only has read access for most configuration parameters.
However, the administrator has write access for all parameters governing
the onboard agent. You should therefore assign a new administrator
password as soon as possible, and store it in a safe place.
The default guest name is "guest" with the password "guest." The default
administrator name is "admin" with the password "admin."
3-48
S
WITCH
4-139
4-141
Hide quick links:
Advertisement
Table of Contents
