Show Map Ip Dscp - SMC Networks 6726AL2 Management Manual

show map ip dscp

This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit. (This is unit 1)
- port - Port number. (Range: 1-26/52)
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show map ip dscp ethernet 1/1
DSCP mapping status: enabled
Port
--------- ---- ---
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
. .
.
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Console#
Related Commands
map ip dscp (Global Configuration) (4-233)
map ip dscp (Interface Configuration) (4-233)
DSCP COS
0 0
1 0
2 0
3 0
61 0
62 0
63 0
P C
RIORITY OMMANDS
4-237