Table 4-20 Show Logging Trap - Display Description; Related Commands - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging:
REMOTELOG status:
REMOTELOG facility type:
REMOTELOG level type:
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
Field
Syslog logging
REMOTELOG
status
REMOTELOG
facility type
REMOTELOG
level type
REMOTELOG
server IP address

Related Commands

show logging sendmail (4-71)
4-66
I
NTERFACE

Table 4-20 show logging trap - display description

Description
Shows if system logging has been enabled via the logging on
command.
Shows if remote logging has been enabled via the logging
trap command.
The facility type for remote logging of syslog messages as
specified in the logging facility command.
The severity threshold for syslog messages sent to a remote
server as specified in the logging trap command.
The address of syslog servers as specified in the logging host
command.
Enabled
Enabled
local use 7
Informational messages only