Tacacs-Server Host; Table 4-30 Tacacs Commands; Tacacs+ Client - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE

TACACS+ Client

Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to
control access to TACACS-aware devices on the network. An
authentication server contains a database of multiple user name/password
pairs with associated privilege levels for each user or group that require
management access to a switch.
Command

tacacs-server host

tacacs-server port
tacacs-server key
show tacacs-server Shows the current TACACS+ settings
tacacs-server host
This command specifies the TACACS+ server. Use the no form to restore
the default.
Syntax
tacacs-server host host_ip_address
no tacacs-server host
host_ip_address - IP address of a TACACS+ server.
Default Setting
10.11.12.13
Command Mode
Global Configuration
Example
Console(config)#tacacs-server host 192.168.1.25
Console(config)#
4-102
I
NTERFACE

Table 4-30 TACACS Commands

Function
Specifies the TACACS+ server
Specifies the TACACS+ server network
port
Sets the TACACS+ encryption key
Mode Page
GC 4-102
GC 4-103
GC 4-103
GC 4-104