802.1X Port Authentication; Dot1X System-Auth-Control; Dot1X Default; Table 4-32 802.1X Port Authentication - SMC Networks 6726AL2 Management Manual

802.1X Port Authentication

The switch supports IEEE 802.1X (dot1x) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).
Command
dot1x
system-auth-control

dot1x default

dot1x max-req
dot1x port-control
dot1x
operation-mode
dot1x re-authenticate Forces re-authentication on specific ports PE
dot1x
re-authentication
dot1x timeout
quiet-period
dot1x timeout
re-authperiod
dot1x timeout
tx-period
show dot1x

Table 4-32 802.1X Port Authentication

Function
Enables dot1x globally on the switch.
Resets all dot1x parameters to their
default values
Sets the maximum number of times that
the switch retransmits an EAP request/
identity packet to the client before it
times out the authentication session
Sets dot1x mode for a port interface
Allows single or multiple hosts on an
dot1x port
Enables re-authentication for all ports
Sets the time that a switch port waits after
the Max Request Count has been
exceeded before attempting to acquire a
new client
Sets the time period after which a
connected client must be
re-authenticated
Sets the time period during an
authentication session that the switch
waits before re-transmitting an EAP
packet
Shows all dot1x related information
A
UTHENTICATION
C
OMMANDS
Mode Page
GC 4-108
GC 4-108
IC 4-109
IC 4-109
IC 4-110
4-111
IC 4-111
IC 4-112
IC 4-112
IC 4-113
PE 4-114
4-107