Table of Contents
Advertisement
Basic Configuration
Displaying System Information
You can easily identify the system by displaying the device name, location
and contact information.
Field Attributes
•
System Name – Name assigned to the switch system.
•
Object ID – MIB II object ID for switch's network management
subsystem.
•
Location – Specifies the system location.
•
Contact – Administrator responsible for the system.
•
System Up Time – Length of time the management agent has been
up.
These additional parameters are displayed for the CLI.
•
MAC Address – The physical layer address for this switch.
•
Web server – Shows if management access via HTTP is enabled.
•
Web server port – Shows the TCP port number used by the web
interface.
•
Web secure server – Shows if management access via HTTPS is
enabled.
•
Web secure server port – Shows the TCP port used by the HTTPS
interface.
•
Telnet server – Shows if management access via Telnet is enabled.
•
Telnet port – Shows the TCP port used by the Telnet interface.
•
Jumbo Frame – Shows if jumbo frames are enabled.
•
POST result – Shows results of the power-on self-test.
B
C
ASIC
ONFIGURATION
3-11
Hide quick links:
Advertisement
Table of Contents
