Configuring Vlan Interfaces; Interface Vlan; Table 4-53 Configuring Vlan Interfaces - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE

Configuring VLAN Interfaces

Command

interface vlan

switchport mode
switchport
acceptable-frame-types
switchport
ingress-filtering
switchport native vlan
switchport allowed vlan Configures the VLANs associated with
switchport gvrp
switchport forbidden
vlan
switchport priority
default
interface vlan
This command enters interface configuration mode for VLANs, which is
used to configure VLAN parameters for a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
Command Mode
Global Configuration
4-200
I
NTERFACE

Table 4-53 Configuring VLAN Interfaces

Function
Enters interface configuration mode
for a specified VLAN
Configures VLAN membership mode
for an interface
Configures frame types to be accepted
by an interface
Enables ingress filtering on an interface IC
Configures the PVID (native VLAN)
of an interface
an interface
Enables GVRP for an interface
Configures forbidden VLANs for an
interface
Sets a port priority for incoming
untagged frames
Mode Page
IC 4-200
IC 4-201
IC 4-202
4-203
IC 4-204
IC 4-205
IC 4-219
IC 4-206
IC 4-224