Command
show ip
access-list
ip
access-group
show ip
access-group
map access-list
ip
show map
access-list ip
access-list ip
This command adds an IP access list and enters configuration mode for
standard or extended IP ACLs. Use the no form to remove the specified
ACL.
Syntax
[no] access-list ip {standard | extended} acl_name
• standard – Specifies an ACL that filters packets based on the
source IP address.
• extended – Specifies an ACL that filters packets based on the
source or destination IP address, and other more specific criteria.
• acl_name – Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
Command Mode
Global Configuration
Table 4-34 IP ACLs (Continued)
Function
Displays the rules for configured IP ACLs
Adds a port to an IP ACL
Shows port assignments for IP ACLs
Sets the CoS value and corresponding output
queue for packets matching an ACL rule
Shows CoS value mapped to an access list for
an interface
A
C
CCESS
ONTROL
L
C
IST
OMMANDS
Mode
Page
PE
4-124
IC
4-125
PE
4-125
IC
4-126
PE
4-127
4-119