Table of Contents
Advertisement
•
Capabilities – Specifies the capabilities to be advertised for a port
during auto-negotiation. (To access this item on the web, see
"Configuring Interface Connections" on page 3-48.) The following
capabilities are supported.
- 10half - Supports 10 Mbps half-duplex operation
- 10full - Supports 10 Mbps full-duplex operation
- 100half - Supports 100 Mbps half-duplex operation
- 100full - Supports 100 Mbps full-duplex operation
- 1000full - Supports 1000 Mbps full-duplex operation
- Sym - Transmits and receives pause frames for flow control
- FC - Supports flow control
•
Broadcast storm – Shows if broadcast storm control is enabled or
disabled.
•
Broadcast storm limit – Shows the broadcast storm threshold.
(64-95232000 octets per second)
•
Flow control – Shows if flow control is enabled or disabled.
•
LACP – Shows if LACP is enabled or disabled.
•
Port Security – Shows if port security is enabled or disabled.
•
Max MAC count – Shows the maximum number of MAC address
that can be learned by a port. (0 - 1024 addresses)
•
Port security action – Shows the response to take when a security
violation is detected. (shutdown, trap, trap-and-shutdown, or none)
Current Status:
•
Link Status – Indicates if the link is up or down.
•
Port Operation Status – Provides detailed information on port state.
(Displayed only when the link is up.)
•
Operation speed-duplex – Shows the current speed and duplex
mode.
•
Flow control type – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)
P
C
ORT
ONFIGURATION
3-89
Hide quick links:
Advertisement
Table of Contents
