Logging History; Table 4-18 Logging Levels - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE
Example
Console(config)#logging on
Console(config)#
Related Commands

logging history (4-60)

clear logging (4-64)
logging history
This command limits syslog messages saved to switch memory based on
severity. The no form returns the logging of syslog messages to the default
level.
Syntax
logging history {flash | ram} level
no logging history {flash | ram}
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory
flushed on power reset).
• level - One of the levels listed below. Messages sent include the
selected level down to level 0. (Range: 0-7)
Level Severity Name
7
6
5
4
3
2
* There are only Level 2, 5 and 6 error messages for the current firmware release.
4-60
I
NTERFACE

Table 4-18 Logging Levels

debugging
informational
notifications
warnings
errors
critical
Description
Debugging messages
Informational messages only
Normal but significant condition, such as cold
start
Warning conditions (e.g., return false,
unexpected return)
Error conditions (e.g., invalid input, default
used)
Critical conditions (e.g., memory allocation, or
free memory error - resource exhausted)