Show Access-Group; Snmp Commands - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE

show access-group

This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
Console#show access-group
Interface ethernet 1/25
IP standard access-list david
MAC access-list jerry
Console#

SNMP Commands

Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
Command
snmp-server
community
snmp-server
contact
snmp-server
location
snmp-server host Specifies the recipient of an SNMP
snmp-server
enable traps
show snmp
4-136
I
NTERFACE
Table 4-39 SNMP Commands
Function
Sets up the community access string to permit
access to SNMP commands
Sets the system contact string
Sets the system location string
notification operation
Enables the device to send SNMP traps
(i.e., SNMP notifications)
Displays the status of SNMP communications NE,
Mode Page
GC 4-137
GC 4-138
GC 4-138
GC 4-139
GC 4-141
4-142
PE