Show Dot1X - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE

show dot1x

This command shows general port authentication related settings on the
switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
• statistics - Displays dot1x status for each port.
• interface
• ethernet unit/port
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Shows whether or not 802.1X port
authentication is globally enabled on the switch.
• 802.1X Port Summary – Displays the port access control parameters
for each interface, including the following items:
- Status
- Operation Mode– Dot1x port control operation mode
(page 4-110).
- Mode
- Authorized
• 802.1X Port Details – Displays the port access control parameters
for each interface, including the following items:
- reauth-enabled – Periodic re-authentication (page 4-111).
- reauth-period
- quiet-period
4-114
I
NTERFACE
-unit - Stack unit. (This is unit 1)
-port - Port number. (Range: 1-26/52)
– Administrative state for port access control.
– Dot1x port control mode (page 4-109).
– Authorization status (yes or n/a - not
– Time after which a connected client must be
– Time a port waits after Max Request Count is
authorized).
re-authenticated (page 4-112).
exceeded before attempting to acquire a new
client (page 4-112).