Table 4-2 Configuration Modes - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE
• VLAN Configuration - Includes the command to create VLAN
groups.
To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
"Console(config)#" which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Mode
Line
Access
Control
List
Interface
VLAN
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#
4-10
I
NTERFACE

Table 4-2 Configuration Modes

Command
line {console | vty}
access-list ip standard
access-list ip extended
access-list mac
interface {ethernet port |
port-channel id| vlan id}
vlan database
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
Console(config-if)#
Console(config-vlan)
Page
4-14
4-117
4-142
4-197