Configuring A Standard Ip Acl; Figure 3-35 Selecting Acl Type - SMC Networks 6726AL2 Management Manual

- MAC: MAC ACL mode that filters packets based on the source
or destination MAC address and the Ethernet frame type
(RFC 1060).
Web – Click Security, ACL, Configuration. Enter an ACL name in the
Name field, select the list type (IP Standard, IP Extended, or MAC), and
click Add to open the configuration page for the new list.
CLI – This example creates a standard IP ACL named david.
Console(config)#access-list ip standard david
Console(config-std-acl)#

Configuring a Standard IP ACL

Command Attributes
• Action – An ACL can contain any combination of permit or deny
rules.
• Address Type – Specifies the source IP address. Use "Any" to include
all possible addresses, "Host" to specify a specific host address in the
Address field, or "IP" to specify a range of addresses with the Address
and SubMask fields. (Options: Any, Host, IP; Default: Any)
• IP Address – Source IP address.

Figure 3-35 Selecting ACL Type

A C
CCESS ONTROL
L
ISTS
4-119
3-79