Time Commands; Table 4-22 Time Commands - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE
Example
Console#show logging sendmail
SMTP servers
-----------------------------------------------
1. 192.168.1.200
SMTP minimum severity level: 4
SMTP destination email addresses
-----------------------------------------------
1. ted@this-company.com
SMTP source email address:
SMTP status:
Console#

Time Commands

The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP). Maintaining an accurate time on the switch
enables the system log to record meaningful dates and times for event
entries. If the clock is not set, the switch will only record the time from the
factory default set at the last bootup.
Command
sntp client
sntp server
sntp poll
show sntp
clock timezone Sets the time zone for the switch's internal clock GC
calendar set
show calendar
4-72
I
NTERFACE

Table 4-22 Time Commands

Function
Accepts time from specified time servers
Specifies one or more time servers
Sets the interval at which the client polls for time GC
Shows current SNTP configuration settings
Sets the system date and time
Displays the current date and time setting
john@acme.com
Enabled
Mode Page
GC 4-73
GC 4-74
4-75
NE, 4-75
PE
4-76
PE 4-77
NE, 4-78
PE