Multicast Filtering Commands; Igmp Snooping Commands; Table 4-63 Multicast Filtering Commands; Table 4-64 Igmp Snooping Commands - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE

Multicast Filtering Commands

This switch uses IGMP (Internet Group Management Protocol) to query
for any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data
out to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to
receive the multicast service.
Command Groups Function
IGMP Snooping
IGMP Query
Static Multicast
Routing

IGMP Snooping Commands

Command
ip igmp snooping
ip igmp snooping
vlan static
ip igmp snooping
version
show ip igmp
snooping
show
mac-address-table
multicast
4-238
I
NTERFACE

Table 4-63 Multicast Filtering Commands

Configures multicast groups via IGMP snooping
or static assignment, sets the IGMP version,
displays current snooping and query settings, and
displays the multicast service and group members
Configures IGMP query parameters for multicast
filtering at Layer 2
Configures static multicast router ports

Table 4-64 IGMP Snooping Commands

Function
Enables IGMP snooping
Adds an interface as a member of a
multicast group
Configures the IGMP version for
snooping
Shows the IGMP snooping and query
configuration
Shows the IGMP snooping MAC
multicast list
Page
4-238
4-242
4-247
Mode Page
GC 4-239
GC 4-239
GC 4-240
PE 4-241
PE 4-241