Telnet Server Commands; Ip Telnet Port; Table 4-14 Telnet Server Commands - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format:
https://device:port_number
Example
Console(config)#ip http secure-port 1000
Console(config)#
Related Commands
ip http secure-server (4-42)

Telnet Server Commands

Command

ip telnet port

ip telnet server Allows the switch to be monitored or configured
ip telnet port
This command specifies the TCP port number used by the Telnet
interface. Use the no form to use the default port.
Syntax
ip telnet port port-number
no ip telnet port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
4-44
I
NTERFACE

Table 4-14 Telnet Server Commands

Function
Specifies the port to be used by the Telnet
interface
from Telnet
Mode Page
GC 4-44
GC 4-45