Displaying Switch Hardware/Software Versions - SMC Networks 6726AL2 Management Manual

CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5
Console(config)#snmp-server location WC 9
Console(config)#snmp-server contact Ted
Console(config)#exit
Console#show system
System description: TigerSwitch 10/100 6726AL2
System OID string: 1.3.6.1.4.1.202.20.46
System information
System Up time:
seconds
System Name:
System Location:
System Contact
MAC address
Web server:
Web server port:
Web secure server:
Web secure server port:
Telnet server:
Telnet port:
Jumbo Frame:
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
RTC Initialization...........PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal power
supply.
0 days, 2 hours, 4 minutes, and 7.13
R&D 5
WC 9
Ted
00-30-F1-12-34-56
enabled
80
enabled
443
enabled
23
Disabled
B C
ASIC ONFIGURATION
4-34
4-138
4-138
4-83
3-13