Replacing The Default Secure-Site Certificate; Figure 3-26 Https Settings - SMC Networks 6726AL2 Management Manual

C
ONFIGURING THE
Web – Click Security, HTTPS Settings. Enable HTTPS and specify the
port number, then click Apply.
CLI – This example enables the HTTP secure server and modifies the
port number.
Console(config)#ip http secure-server
Console(config)#ip http secure-port 441
Console(config)#

Replacing the Default Secure-site Certificate

When you log onto the web interface using HTTPS (for secure access), a
Secure Sockets Layer (SSL) certificate appears for the switch. By default,
the certificate that Netscape and Internet Explorer display will be
associated with a warning that the site is not recognized as a secure site.
This is because the certificate has not been signed by an approved
certification authority. If you want this warning to be replaced by a
message confirming that the connection to the switch is secure, you must
obtain a unique certificate and a private key and password from a
recognized certification authority.
Note: For maximum security, we recommend you obtain a unique Secure
Sockets Layer certificate at the earliest opportunity. This is because
the default certificate for the switch is not unique to the hardware
you have purchased.
3-56
S
WITCH

Figure 3-26 HTTPS Settings

4-42
4-43