Passwords; Conversion And Mapping Information - Nortel 1000E Upgrade

Page 28 of 228

Passwords

Conversion and mapping information

NN43041-465 Standard 01.04
The Terminal Server can be located anywhere on the ELAN subnet.
However, if the Terminal Server is used to provide local connections to a
Com port on the Call Server, it must be collocated with the system.
The Terminal Server can also be used as a central point to access and manage
several devices through their serial ports.
Currently, the CS 1000E only supports the MRV IR-8020M commercial
Terminal Server.
Two login passwords are key to the upgrade process:
1 PWD1
2 Limited Access Password (LAPW)
PWD1
PWD1 is the central login defined at the Call Server. If the system is fully
functional (that is, the connection is active) between the Call Server,
Signaling Server, MG 1000E Expansions, and Voice Gateway Media Cards,
the PWD1 login grants access to all Command Line Interfaces (CLIs) and
Element Manager. If the link is not active, the specific login configured for
each component must be used.
LAPW
Limited Access Password (LAPW) login can be configured on the Call Server
to provide limited access to specified overlays. LAPWs can be used to log
into the Call Server or to Element Manager. For more information, see System
Management (NN43001-600).
The following information is required for the database conversion that must
be performed as part of the Release 5.0 software installation.
July 2007
IMPORTANT!