Configuring The Nms - Nortel Call Center Server Installation And Maintenance Manual

Working with alarms and events

Configuring the NMS

After you configure the server, you must configure the NMS to receive and
interpret traps (including identification to the NMS, and the origin and format of
the Symposium Call Center Server traps). To do so, you must load or compile
the Symposium Call Center Server Management Information Block (MIB) files
in the NMS.
The following MIB files describe the format of the traps generated by the server:
nt-ref.mib (MIB-II)
nbflt.mib (NGen MIB)
The files are available in the following locations:
on the Server Application CD for Symposium Call Center Server, in
..platform\default\nortel\data\.
on the server in Symposium Call Center Server, in the path D:\nortel\data
For more information about configuring your NMS, refer to your NMS
documentation.
Format of the NGen MIB
Symposium Call Center Server supports the Windows standard MIB-II. In
addition, it provides its own MIB, the NGen MIB.
992
Standard 7.02
Symposium Call Center Server