Lacp Linkagg Size - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Link Aggregation Commands

lacp linkagg size

Creates a dynamic aggregate group that uses the Link Aggregation Control Protocol (LACP) to establish
and maintain link aggregation. The size parameter is required to create the link aggregate group.
lacp linkagg agg_num size size
[name name]
[admin state {enable | disable}]
[actor admin key actor_admin_key]
[actor system priority actor_system_priority]
[actor system id actor_system_id]
[partner system id partner_system_id]
[partner system priority partner_system_priority]
[partner admin key partner_admin_key]
no lacp linkagg agg_num
Syntax Definitions
agg_num
size
name
enable
disable
actor_admin_key
actor_system_priority
actor_system_id
partner_system_id
partner_system_priority
partner_admin_key
OmniSwitch CLI Reference Guide
The number corresponding to the dynamic aggregate group. Must be a
unique integer in the range 0–31 (stackable products) or 0–127 (chassis-
based products).
The maximum number of links that may belong to the aggregate. Values
may be 2, 4, or 8.
The name of the dynamic aggregate group. May be any alphanumeric
string up to 255 characters long. Spaces must be contained within
quotes (e.g., "Dynamic Group 1").
Specifies that the dynamic aggregate group is active and is able to
aggregate links.
Specifies that the dynamic aggregate group is inactive and not able to
aggregate links.
The administrative key value associated with the dynamic aggregate
group. Possible values are 0–65535.
The priority of the dynamic aggregate group. Possible values are
0–65535.
The MAC address of the dynamic aggregate group on the switch.
The MAC address of the remote system's aggregate group to which the
switch's aggregate group is attached.
The priority of the remote system to which the aggregation group is
attached. Possible values are 0–65535.
The administrative key for the aggregation group's remote partner.
Possible values are 0–65535.
June 2012 page 8-9