802.1AB Commands
lldp transmit interval
Sets the transmit time interval for LLDPDUs. This is the amount of time the switch waits between each
transmission of an LLDPDU.
lldp transmit interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
This command applies only to LLDP-enabled ports.
•
LLDP also multiplies the transmit time interval by the transmit hold multiplier to determine the time to
live (TTL) value that is advertised in the LLDPDU.
Examples
-> lldp transmit interval 40
Release History
Release 6.3.1; command introduced.
Related Commands
lldp transmit hold-multiplier
show lldp local-system
MIB Objects
lldpConfiguration
lldpMessageTxInterval
OmniSwitch CLI Reference Guide
The transmit interval value, in seconds. The valid range is 5–32768.
default
30
Sets the transmit hold multiplier value. This value is used to calculate
the Time To Live (TTL) value that is advertised in an LLDPDU.
Displays local system information.
June 2012
page 12-5