Clear Erp Statistics - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet Ring Protection Commands

clear erp statistics

Clears ERP statistics for all rings, a specific ring, or a specific ring port.
clear erp statistics [ring ring_id [port slot/port | linkagg agg_num]]
Syntax Definitions
ring_id
slot/port
agg_num
Defaults
By default, statistics are cleared for all ERP rings in the switch configuration.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Enter a ring ID to clear the statistics for a specific ring.
•
Enter a ring ID and a ring port number or link aggregate ID to clear the statistics for a specific port or
link aggregate.
•
The specified ring ID must already exist in the switch configuration.
•
The specified port must belong to the ring identified by the ring ID.
Examples
-> clear erp statistics
-> clear erp statistics ring 5
-> clear erp statistics ring 5 port 1/2
-> clear erp statistics ring 5 linkagg 10
Release History
Release 6.3.4; command was introduced.
OmniSwitch CLI Reference Guide
An existing ERP ring ID number. The valid range is 1- 2147483647.
The slot number for the module and the physical port number on that
module.
The link aggregate ID number.
June 2012 page 9-15